What Tools Do I Need To Build A Pc

Most of the time you really only need a phillips screwdriver but here is a list that will make your life easier when building a pc as a note don t use magnetic based tools this can harm some more sensitive parts in the pc.

All you need is a screwdriver but other things will be useful. All computer tools should be non magnetized. Visit pc part picker. You should have at a minimum small and medium sized phillips and flat screwdrivers and a 1 4 nut driver.

A long shaft also aids in keeping the handle out of the way when working in tight spaces it s a good idea to keep a short screwdriver around as well for the same reason. The bare essentials you ll need to build a pc including the following. Make sure that you have all of your parts and tools at the ready. Fortunately you don t need many tools or extra parts to build your pc almost everything you need will be included in your components boxes.

Screwdrivers and nut drivers. Before you start building a pc you need to get your workspace ready. Its very tempting but go without it. The number one most important tool for pc building is a phillips head screwdriver with a big bit helpful to avoid stripping the head.

RELATED ARTICLE :

• what a man should do in a relationship
• trust and wait for what is still unseen
• what 10 year old girls want for christmas

Techradar tools of the trade although a single phillips screwdriver is all you need to construct a pc you may want a few more things on hand just in case. Phillips head screwdriver a magnetic one for finding those dropped screws anti static wrist strap so you don t damage any pc parts with static electricity check our pc assembly guide to learn how to build a pc. For example needle nose. Align the notches on the module with the ridge in the slot then firmly press the module in until it clicks.

You will need at a minimum the following simple tools. At the very least you ll want. A precision screwdriver set should have all the screwdrivers you ll need. Most if not all of these parts can be.

Flat workspace no carpet. Needle nosed pliers or forceps. Ram is the easiest hardware to install when you re building a pc. Scissors and a craft knife box cutter for opening packaging cable ties and wire cutters to trim them or you can use twist ties.

Hold your memory modules on the side to avoid touching the chips and gold pins.